IBM iSeries AS400 IBM Power Systems and Software  Loading... Please wait...
  • My Account 
Call 770-772-0200

Currency Displayed in

Shop for Equipment

IBM 2743 1Gbps PCI Ethernet IOA

Hover over image to zoom

  • Image 1

 Product Description

IBM 2743 1Gbps PCI Ethernet IOA

  • 1Gbps Ethernet

IBM 2743 is used for attaching the iSeries Server to IEEE standard 802.3Z high-speed 1Gbps) Ethernet TCP/IP LANs. It can also be used to connect to existing 100Mbps Ethernet LANs via switches with 10/100/1000Mbps ports. The adapter supports a multi-mode fiber interface with via a duplex (62.5 micron or 50.0 micron) SC connector cable. #2743 requires a Gigabit Capable Switch with at least one port that supports a 1000BASE-SX interface with IEEE 802.3z and 802.3u compliance. Restrictions: #2743 supports 1000MBps (1Gbps) full duplex interface only. It cannot negotiate down to a lower speed. Stations on the 10Mb and 100Mb switched LANs can communicate with the #2743 through a switch that is capable of handling all these speeds. If a #2743 is controlled by a #2790/2791/2799 Integrated Server, then specify code #0225 1Gbps Ethernet Specify must be ordered for each #2743 controlled by an Integrated Server. The #2743 can be directly attached to a Linux partition. When ordered as #0601: Linux Direct Attach #2743, an IOP is not required. When directly attached to a Linux partition, the #2743 cannot be accessed by OS/400 partitions. #2743 only supports TCP/IP connection; SNA and IPX connections are not supported. #2743 cannot be used with the #2890: PCI Integrated Netfinity Server. Requires a 64-bit card slot.

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Data Tech Computer Services, Inc.
5910 Gateway Drive
Alpharetta GA, 30004

Copyright 2024 Data Tech Computer Services, Inc.. All Rights Reserved.

Click the button below to add the IBM 2743 1Gbps PCI Ethernet IOA to your wish list.